INCENSE STICK HOLDER | concrete
Andreas Riess, 2020
Our interpretation of a holder for incense sticks. Reduced to pure function, minimalist geometry, cast in concrete.
A hole at an angle of about 45 degrees takes most incense sticks. Their maximum length must not exceed 22 centimeters. If necessary, the incense sticks can be shortened accordingly. The holder with its stylish grove catches the falling ashes.
Weight and dimensions, features
210 x 65 x 30 mm, weight: 650 g
Inscribed on the bottom side with a ceramic plate with the DSR logo. Two strips of cork on the underside protect the surfaces on which the incense holder is placed.
The incense holder is delivered with a banderole made of 170g/sqm offset paper.
Production
Handmade in Hamburg
INCENSE STICK HOLDER
Sustainability
An incense stick holder consists of sand and 200g cement. According to Wikipedia this makes up about 150g CO2. This amount is released for the production of only about 0.15 liters of milk, which is less than one glass.
The incense stick holder can be 100 percent recycled. Shredded, it provides a valuable aggregate for road construction or concrete.
Source: Wikipedia
INCENSE STICK HOLDER | handmade in Hamburg